LCD Display Constant Temperature Humidity Climatic Chamber Lab
Incubator
Environmental Test Chamber.pdf
I. Uses:
This product is suitable for environmental protection, health
epidemic prevention, pharmacological supervision, agriculture and
livestock, aquaculture and other scientific research institutions,
production departments, is the water analysis and BOD
determination, bacteria, mold, microbial culture, preservation,
plant cultivation, breeding experiments of special thermostat
equipment. Green environmental protection 134a refrigerant.
II. Technical parameters:
| Model | Temperature Control Range | Power (KW) | Volume | Inner Liner Size (Width, Depth and Height) mm | Outer Box Size (Width, Depth, Height) mm |
| ZL-50 |
0-60℃ | 0.8 | 50L | 300*400*400 | 500*540*940 |
| ZL-80 | 0.8 | 80L | 350*450*450 | 540*600*1040 |
| ZL-150 | 0.9 | 150L | 400*500*730 | 620*640*1270 |
| ZL-250 | 1 | 250L | 500*500*950 | 700*640*1490 |
| ZL-350 | 1.2 | 350L | 500*600*1100 | 750*750*1550 |
III. Structural Features:
1.The product is vertical structure, the shell is made of high
quality cold-rolled steel plate, the surface of electrostatic
spraying.
2.The studio is made of mirror stainless steel plate processing.
The four corners of the semi-circular arc over, partition bracket
can be freely loaded and unloaded, easy to clean.
3.Temperature control system adopts microcomputer chip processor
PID control mode, precise temperature control fluctuations, and has
a time setting function, the maximum time can be set to 99 hours
and 59 minutes.
4.The door with vacuum tempered glass observation window, can be
observed through the observation window and lighting devices to
observe the situation of the items inside the workplace, a broader
view.
5.The use of brand compressors and circulating fans, a unique air
supply system to make the temperature more uniform, to avoid the
experimental process because of excessive air volume, resulting in
the volatilization of samples.
6.The left side of the box is equipped with Ф40 test holes for
users to check and external built-in equipment leads.
IV. Using Environment:
1.Power supply AC220V 50Hz.
2.Ambient temperature: 5 ℃ -35 ℃ (set temperature ≦ 10 ℃ when the
ambient temperature ≦ 28 ℃)
3.Relative humidity≦80%;
4.The instrument shall not be surrounded by strong vibration and
the presence of corrosive gases;
5.The instrument should avoid the influence of direct sunlight and
other sources of heat and cold;
6.The instrument should be placed horizontally, and keep at least
20 centimeters of clearance around;
7.The instrument should be secured in a well-ventilated room
without serious dust.
