2000kN/3000kN Concrete Compression Pressive Pressure Testing
Machine
Introduction:
The testing machine is mainly used for brick, stone, cement,
concrete and other building materials, compressive strength
test,also used to test the compressive performance of other
materials.
Spatial adjustment method:
Through the hand wheel rotation, the adjustment of space to achieve
compression.
Hydraulic System:
The oil tank is sucked through the filter screen and be inhaled
pump oil ,through the petroleum pipeline of oil pump transport to
oil valve,When the hand wheel to send off the oil, due to the role
of oil will push the piston, the oil from the return pipe to tank,
when the hand wheel to open get the oil, then the working fluid
into the fuel tank through the tubing, pressure tubing through and
through oil return valve to tank.
Control system:
This machine adopts hydraulic loading, electronic measuring force,
with a load of figures, the loading rate shows ,the maximum load to
maintain, as well as overload protection and power data retention
and other functions.
Safety protection device:
When the test force more than 3% of the maximum test force, the
overload protection, oil pump motor shut down.
Fixture:
Whole set fixtures include: a set compression platen fixture
Main performance technical specifications:
| Max load | 2000kN | 2000kN | 3000kN |
| Test force measuring range | 4%-100%FS |
| Test Force showed the relative error | ≤indicating value±1% | ≤indicating value±1% | <indicating value±1% |
| silk pole adjustment method | Manual operation | power-driven | power-driven |
| Test Force Resolution | 0.01kN | 0.01kN | 0.01kN |
| Piston diameter | φ250mm | φ250mm | Φ290mm |
| Piston stroke | 50mm | 50mm | 50mm |
| Hydraulic pump rated pressure | 40MPa |
| Bearing plate size | 250mm×220mm | φ250mm×φ220mm | φ300mm×φ300mm |
Advantage Service:
1. We have R&D, designing department which can not only provide
technological machines but also can satisfy special customized
needs of our clients.
2. Over 50 years’ manufacturing experience, advanced machine and
sophisticated handcraft.
3. There are TWO laboratories in our factory: Environmental
laboratory and Physical laboratory.
4. Our factory have adequate stock monthly, which can meet
customers’ urgent needs.
5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base,
equipped with 120 technicians, we are capable to take large budget
project.
Technical Support:
1. SUS Stainless plate is cut by advanced leaser machine which can
ensure accuracy; All machine appearance is anti-rust electrostatic
painting;
2. Imported electronic components:
ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron/Philips and
imported compressor:BOEK/TECUMSEH, which can keep the machine’s
service life over 10 years.
After-sale Service:
1. We promise 14 month’s warranty and lifetime maintenance.
2. During the warranty time, any components broken is FREE to
change, and we offer FREE picture, video instruction after your
purchasing of our machine.
3. All machine is sent with a packing list, operation
instruction(paper file), warranty certificate(with valid date) and
other accessories.
Package:
We pack machine with plastic wrap (water proof), then pack with
poly wood board,
cystosepiment inside the board and machine for fixture.
