Hydrostatic Pressure Tester , LCD Touch Screen And PLC Control
Control mode
The machine uses a programmable logic controller (PLC) control, use
LCD touch screen input control data and instructions and displays
the results of operation and process control. The test is completed
or reached the test of time, automatically stop working. Brightest
are independent of each other, if the way the test is completed or
fails, does not affect the work of other road.
The main structure:
The test machine by the pressure control system, consisting of a
heated medium tank and the holder of three parts.
1. The pressure control system: mainly by the pressure source, the
pressure lines and electrical control of three parts. Pressure
source (ie, high-pressure pump) is used for the primary system
pressure test conditions provided by the total pressure, the use of
European and American imports or joint venture production of
quality high flow high pressure piston pump. Pressurized pipe
routing accumulators, pressure gauge, solenoid valves, check
valves, filters, manual needle valve, connecting piping and other
components, which is imported from Germany, the solenoid valve,
pressure sensor using domestic high-end products, copper tubing
tube, quick connect card sets, other fittings are stainless steel
pipe fittings. Electrical control by touch screen, PLC master
controller, AD converter module, relays, various switches and other
components.
2, The thermostat medium tank: mainly by the cabinet, the
circulation pump, a heater (condenser) and temperature control
system. According to the user setting its working temperature, for
medium water in the tank is heated (cooling), and gradually reaches
the user desired temperature. Medium box split single thermostat
and thermal heating and cooling two.
3, Fixtures: According chucking way into type A (without lever) and
B (with lever) of two types. A type clamps are generally applicable
to the following plastic pipe diameter φ250, B-type clamps are
generally applicable to plastic pipe diameter φ250 above. This
series of reasonable structure fixture clamping fast, reliable
sealing, easy removal features.
XGY-16P series of hydrostatic and pipes burst test software with
full Chinese graphical interface, real-time monitoring during the
test during the test of time - pressure curve, with the printout,
store the number of trials
Parameters
| Pressurized range | 0.1Mpa-16MPa |
| Constant pressure accuracy | +2%,-1% |
| Timing range | 1min~10000h |
| Timing accuracy | less than 0.1% |
| Test pieces | 3(standard),6 (or order) 100 |
| Power supply | 220v±10% |
| Temp Range | Room-temp.~95°C or 18°C~95°C (Thermal cooling medium tank) |
| Power | AC220V,4.5kw |
