Structure And Principle
The main engine is composed of four parts: the machine body, the
oil pump, the control valve, and the electrical control.
1. The fuselage parts are composed of upper frame, lower frame,
fuel tank, heating plate, oil cylinder, plunger, etc. The four
uprights bear 25T tension and double as guide rails for heating
plate lifting.
2. Oil pump components: use the hydraulic oil pump imported from
Taiwan to supply oil to the oil cylinder through the one-way valve
control valve.
3. The control valve component is composed of an automatic drain
valve installed on the hydraulic station and a shock-resistant
electric contact pressure gauge, which controls the rise and fall
of the hot plate and other actions.
Parameters:
| 1. Capacity | 150T (Can be customized) |
| 2. Temperature range | normal temperature～300℃ |
| 3. Temperature controller | microcomputer high-precision LED display, key setting input,
numerical display |
| 4. Timer | LED display, time range 0.1S～99min～9.9hr |
| 5. Temperature control method | P.I.D method microcomputer control performance is stable, and
temperature control is accurate. |
| 6. Heater | built-in cylindrical heating mold, scientifically coordinated
holes, fast temperature generation, long life, easy maintenance |
| 7. Heating time | about 15min at room temperature～170℃ |
| 8. Hot pressing plate | 450×450mm high temperature resistant steel plate, the surface is
carbonized and quenched, the heat conduction is fast, the pressure
is parallel and unchanged |
| 9. Cooling temperature range | normal temperature～350℃ |
| 10. Oil pressure system | hydraulic flow closed loop control system, with automatic pressure
compensation function. The time of the first pressurization and the
second pressurization and the third pressurization can be preset,
the load is strong, and the lifting is stable; automatic
pressurization, pressure maintenance, Relieve pressure. |
| 11. Oil cylinder stroke | Max 200mm |
| 12. Oil cylinder speed | 8mm/s |
About us
We are Zhongli Instrument Technology Co., Ltd, an instrument
Expert, Headquartered in Dongguan, Guangdong, China.since 2007,
specialized in manufacturing Lab testing equipments.
Throughout its more than 14 years of history, Our products have
sold well in the Europe, America and Southeast Asia market and
total more than 95 countries these years,especially favored by
European and American countries.
In addition to standard machines, our R&D team can customize it
for you. Just tell us your needs and we will make you satisfied.
Advantage Service:
1. We have R&D, designing department which can not only provide
technological machines but also can satisfy special customized
needs of our clients.
2. Over 50 years’ manufacturing experience, advanced machine and
sophisticated handcraft.
3. There are TWO laboratories in our factory: Environmental
laboratory and Physical laboratory.
4. Our factory have adequate stock monthly, which can meet
customers’ urgent needs.
5. Annual sales over 1,000,000USD; 30,000㎡manufacturing base,
equipped with 120 technicians, we are capable to take large budget
project.
Technical Support:
1. SUS Stainless plate is cut by advanced leaser machine which can
ensure accuracy; All machine appearance is anti-rust electrostatic
painting;
2. Imported electronic components:
ABB/Siemens/Panasonic/Saginomiya/Danfoss/Emkarate/Omron/Philips and
imported compressor:BOEK/TECUMSEH, which can keep the machine’s
service life over 10 years.
