UV Curing Machine UV Lamp Flat Machine Spot UV
Coating Chamber Price
Environmental Test Chamber.pdf
Product Description:
Flat UV Curing Machine is used for flat surfaces UV curing, which
is mainly for drying solid process and flat surface UV ink drying
solid process, such as various of UV ink, UV adhesives, UV paint
curing, plastic, glass, hardware.
Features:
1. With the high efficiency UV light, it can finish the UV curing
quickly, the high level of UV light can be adjusted, and setting
the right parameters for UV curing.
2. LED display shows the conveyor running speed, convenient to
process operation.
3. The machine body adopts the extra-thick stainless steel for
hardness and durable.
4. UV lamp and transformers which are imported make it fit for
special ventilation design, which can be max effectiveness.
5. It suits for different UV curing process. This series of
products is different with the traditional high-power, high-power
UV equipment.
6. In order reduce the cost and improve output for our customer.
7. full and half light switch, reasonable power saving.
Machine Size:
| Machine Length | 2000mm |
| UV Working Area | 1200mm |
| Feed Operation Area | 400mm |
| Discharge Area | 400mm |
| Entrance Height | 100-150mm can be adjustable |
| Entrance Width | 500mm |
| Conveyor Belt Distance To Floor | 750±50mm |
Machine Electric Parts:
| General Power | 7.0 kw 50A |
| Belt Speed Range | 0-10m/min |
| Motor Power | 800w |
| Speed Controller | 500W |
| Exhaust Fan | CY-125 |
| Ampere Meter | 50A |
| Voltmeter | 220V |
| Machine Voltage | 220v 220V±5% 50Hz Three-wire system |
Dry Solid Light Source:
1, ultraviolet radiation dry solid light source, to ensure the dry
solid effect.
2, ultraviolet light source effective radiation
Lamp length luminous length 560mm total length 800mm lamp power
adjustable range (2KW-3KW adjustment height to achieve )
3, UV light source wavelength 350μm to ensure the curing effect
4, UV UV lamp 1, 3KW UV lamp living in the cavity of the horizontal
installation (left, top, right) (to achieve the best effect of dry
solidification)
5, 1 set of controller panel
The Main Structure Of The Equipment:
| Equipment Body Structure | Model |
The Outside Body of the Working Tunnel | 1.2 mm high quality stainless steel | A3 |
| The Work Space Tunnel Cavity | 1.0 mm mirror stainless steel plate | # 212 |
| The Body Brace | Rectangular tube steel | 2 "square tong |
| The Wind System | Forced wind combination exhauster (take out harmful gases) | SANGJING
|
| Thermal Insulation Material | vacuum aluminum silicate + silk cotton double | 60 K
|
| Conveyor Belt | Teflon Mesh Belt | |
| Lamp Adjustable Height | 100 mm - 180 mm Manual self-adjustment | |
| Balancing Device | smooth water goblet | 50 * 12 * 100 mm
|
